HOME |
FORUM
|
CONTACT US
| |||||||
![]() |
| | LinkBack | Thread Tools | Rate Thread | Display Modes |
|
#1
| |||
| |||
| if you are using a serial for Nero (doesnt belong to you) if you are using a serial for Nero that does'nt belong to you. Nero will accept any serial number even if it is invalid, and will (randomly) burn you bad CDs (while telling you that the burn was sucessful...) Therefore we must test the serial number right after installation (before burning anything). Under Dos prompt, go to Nero's directory, type the following: nerocmd --listdrives That is: nerocmd, then a space, then 2 dashes, then listdrives. If you see a message with "OK" in the end of it, then the serial you used is fine. Here are some helpful hints in using DOS: 1. Go to your AHEAD/NERO folder (wherever it is in your PC...) and Open it 2. From: START -> RUN Type: COMMAND -> click OK 3. Type: nerocmd --listdrives [Enter key] 4. Done! Last edited by moonie : 26th August 2005 at 03:01 PM. |
| Sponsored Links |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
| |